AMSOIL Diesel Oils | ||||
|
|
AME SAE 15W-40 Synthetic Heavy Duty Diesel and Marine Motor Oil |
|
|
AMSOIL Fuel Additives for All Applications
AMSOIL provides top-quality fuel additives for gasoline and diesel applications. Four-wheel drive vehicles benefit from the fuel enhancement properties found in AMSOIL fuel additives.
AMSOIL Diesel Concentrate
AMSOIL Diesel Concentrate (ADF) is a total system
cleaner and lubricity improver for all types of diesel
engines. AMSOIL Diesel Concentrate compensates for
the quality variances of different fuels (including
biodiesels) and the deficiencies of today’s ultra-low
sulfur diesel fuel for better engine operation. It reduces
cylinder wear, retains TBN longer, minimizes soot
loading and acts as a fuel stabilizer. AMSOIL Diesel
Concentrate restores horsepower to like-new levels
and improves fuel economy by up to five percent.
AMSOIL Cold Flow Improver
AMSOIL Cold Flow Improver (DFF) for diesel fuel is
designed for use in ultra-low sulfur diesel fuel, yet
works well with conventional fuels. It functions by
modifying wax crystal formation at low temperatures
to depress the pour point and improve cold flow filtration
properties. AMSOIL Cold Flow Improver contains
jet fuel-type deicer to help prevent ice formation
in fuels contaminated with water. It is recommended
for use with diesel engines and is compatible with
diesel exhaust particulate filters. AMSOIL Cold
Flow Improver is excellent for use with AMSOIL
Diesel Concentrate and AMSOIL Cetane Boost
Additive.
AMSOIL Cetane Boost
North American diesel fuel is notoriously cetane-deficient.
Often, the performance problems drivers blame
on their diesel engines, like rough running and a
lack of power, are actually caused by cetane-deficient
diesel fuel.
Instead of igniting smoothly, low cetane fuel explodes, sending shock waves through the combustion chamber and throughout the engine. AMSOIL Cetane Boost (ACB) (for use in all diesel engines) raises cetane three to seven numbers, helping engines start dependably and run smoothly and powerfully. AMSOIL diesel fuel additives are alcohol-free for seal protection. AMSOIL diesel fuel additives may be mixed during fueling.
AMSOIL PI Performance Improver
AMSOIL PI Performance Improver (API) is the most potent
gasoline additive available today. As a concentrated detergent,
it is unsurpassed in cleaning combustion chamber
deposits, intake valve deposits and port fuel injector
deposits, eliminating the need for expensive fuel injector
cleaning procedures. It is ideal for use prior to
emissions inspections, and it helps maintain peak
engine efficiency, fuel economy, power and drivability
in newer low mileage engines. In engines
with accumulated deposits, PI provides improved
fuel mileage up to 5.7%, reduced emissions,
restored power and performance, reduced need for
higher octane fuel, reduced carbon rap and pre-ignition,
better drivability and smoother operation after
only one tank of gasoline.
Gasoline Stabilizer (AST)
Gasoline Stabilizer (AST) keeps gasoline and diesel fuel from oxidizing and deteriorating,
prolonging its storage life. Gasoline Stabilizer inhibits the formation of
varnish and gum, which helps prevent poor injector and engine performance.
AMSOIL Engine Fogging Oil’s (FOG)
AMSOIL Engine Fogging Oil’s (FOG) superior film retention provides stored
equipment with long-term protection against corrosion and dry starts, extending
engine life and reducing operating expenses. Its aerosol spray formulation
offers easy and clean application, while reaching more components and offering
complete distribution of the oil, something especially beneficial in applications
with horizontal cylinder orientation such as outboard motors.
AMSOIL Fuel Additives For All Applications | ||||
|
|
|
|
|
|
|
| ||
Donaldson® Endurance™
Donaldson Endurance air and oil filters provide the highest level of filtration
efficiency in the heavy-duty industry. Specifically designed for on road,
heavy-duty class 6, 7 and 8 vehicles, Donaldson Endurance air and oil filters
feature revolutionary nanofiber technology.
Endurance air filters offer longer engine life, longer filter life, initial efficiency up to 99.99 percent and five times more capacity than conventional cellulose filters.
Endurance air filters come with a “twice the miles” guarantee to deliver twice the miles between change intervals over cellulose air filters for on highway applications, or customers receive a new filter at no charge. Donaldson Endurance oil filters are made with advanced synthetic technology that results in fibers that have a controlled size, down to submicron diameters.
This controlled process allows Endurance oil filters to deliver both higher dirt holding capacity at the same pressure differential and higher efficiency compared to conventional cellulose filters. The synthetic media also has better durability and increased resistance to water.
Donaldson P-Series
AMSOIL also offers filtration products from Donaldson’s P-Series line.
With many applications that differ from, and several that coincide with the
Endurance line, Donaldson P-Series filters offer premium filtration at a competitive
price.
Oil Filters
Donaldson P-Series oil filters feature housing constructed with heavy gauge
steel and domed construction, providing superior pressure fatigue performance.
Donaldson P-Series oil filters are constructed with either full-synthetic media
or synthetic blends for high efficiency. The center tube allows more flow without
compromising strength, and the louvered design eliminates tearing during pleat
movement. Hydraulic Filters AMSOIL offers a full line of hydraulic filters
from Donaldson. Donaldson P-Series hydraulic filters provide superior protection
for hundreds of machinery and component applications, both in the factory and
on heavy-duty equipment.
Fuel Filters
Donaldson fuel filters provide clean, filtered fuel that prevents pump wear,
injector clogging, and premature engine wear and can boost fuel efficiency.
AMSOIL offers a complete line of spin-on and cartridge-style Donaldson fuel
filters. Donaldson filter media features a multiple-layered design specifically
made to remove water and contaminants from the fuel stream.
Coolant Filters
Donaldson P-Series coolant filters remove contaminants from the cooling system,
minimize the risk of filter plugging and keep engines running efficiently.
Dual Gard By-Pass Oil Filtration System
The AMSOIL Dual Gard By-Pass Oil Filtration System treats oil to ultra fine filtration, which increases engine and oil life and enhances engine performance.
AMSOIL Ea By-Pass Filter elements remove sub micron-sized particles, keeping oil analytically clean. Clean oil lubricates and cools efficiently because its coefficient of friction is low. It promotes superior piston ring seal, which improves compression and engine power, and reduces blow-by, oil consumption and fuel dilution. Oil lasts longest when clean, since its additives are not consumed by contaminant control.
The Dual Gard system allows the installation of two AMSOIL Ea By-Pass Oil Filter elements, doubling the by-pass filter element change intervals. The system also makes room for a larger volume of lubricating oil, allowing the oil to run cooler and rest more. Both increase oil durability.
Synthetic SAE 10W, 30, 50
AMSOIL Synthetic SAE 50 Powershift Transmission Fluid exceeds Fuller CD-50
performance specifications and is ideal for use in Fuller, Rockwell, Spicer,
Fabco,
Warner and other large truck manual transmissions.
Superior Wear Protection
AMSOIL Synthetic Powershift Transmission Fluids (CTG, CTJ, CTL) are formulated
for superior wear protection, without viscosity index improvers. They maintain
grade throughout service life, providing long-term protection against equipment
wear, even when equipment is frequently subjected to sustained periods of
applied pressure or high horsepower and high torque.
High- and Low-Temperature Performance
AMSOIL Synthetic Powershift Transmission Fluids provide superior protection
in high temperatures. They inhibit the formation of varnish, deposits and
sludge, while their excellent heat transferring abilities help hot-running
equipment operate up to 50°F cooler. In low temperatures, AMSOIL Synthetic
Powershift Transmission Fluids flow readily for dependable startup and post-startup
protection.
Extended Drains
AMSOIL Synthetic Powershift Transmission Fluids provide two to five times the
service life of conventional petroleum fluids if kept free of dirt and moisture.
They may be used in manual transmissions for 250,000 miles or five years,
whichever comes first.
API GL-5, MT-1, SAE 75W-90, 80W-90, 75W-140, 75W-110, 80W-140
AMSOIL synthetic gear lubes keep differentials and EP gear lube-equipped transmissions running clean, protected and at top efficiency.
Load-Bearing and Extreme Pressure Protection
AMSOIL synthetic gear lubes are formulated to protect gears operating in heavily
loaded conditions, whether or not the gears operate with full film lubrication.
Superior film strength and viscosity retention offer superior protection
in full film regimes, while top-quality extreme pressure agents protect when
a full lubricating film does not separate gear surfaces. The thermal durability
of AMSOIL synthetic gear lubes ensures extreme-pressure protection after
extended exposure to extreme temperatures. The
extreme pressure agents in conventional gear lubes sometimes lose their effectiveness
after extended exposure to high temperatures, leaving gears vulnerable
to metal-to-metal contact and wear.
Friction Reduction
AMSOIL synthetic gear lubes effectively reduce friction, power losses and temperatures
through the use of high-quality synthetic oils and an extra treatment of
extreme pressure additives. Reduced axle friction is associated with reduced
fuel consumption and can save fleets thousands of dollars per year. High-
and Low-Temperature Performance AMSOIL synthetic gear lubes maintain their
viscosity better with changes in temperature than conventional lubes, which
allows them to protect over a broader
temperature range. They maintain better low-temperature fluidity than conventional
gear lubes, while also protecting better in higher temperatures.
Extended Drains
In commercial line haul trucks, AMSOIL FGR and FGO gear lubes may be used up
to 500,000 miles. In cars, SUVs and light-duty trucks AMSOIL gear lubes greatly
exceed original equipment manufacturer’s petroleum gear lube drain
intervals and may be used up to 50,000 miles in severe service or 100,000
miles in normal service, or according to the owner’s manual, whichever
is longer.
Additional Benefits
AMSOIL synthetic gear lubes provide limited slip capability, and may be used
in limited slip differentials without special additives. AMSOIL synthetic
gear lubes also provide outstanding protection against rust, which is important
for stored equipment.
AMSOIL Long Life Gear Lubricants | |
|
|
AMSOIL synthetic extreme pressure lithium complex greases offer outstanding protection and extended service lives.
Load-Bearing and Extreme
Pressure Protection
AMSOIL synthetic extreme pressure lithium complex
greases offer outstanding protection in high-load and
extreme-pressure operations. The great film strength
of synthetic base stocks, mechanical stability of lithium
complex thickeners and the protective shield provided
by extreme-pressure agents make AMSOIL greases top
of the line.
Friction Reduction
AMSOIL synthetic extreme pressure lithium complex
greases have a low coefficient of friction that helps keep
wear rates low and efficiency high by minimizing friction.
High- and Low-Temperature Performance
Outstanding thermal and oxidative stability allow
AMSOIL synthetic greases to protect in higher temperatures
than conventional greases without breaking
down or forming deposits. Outstanding cold-temperature
pumpability allows them to protect in lower temperatures
than conventional greases.
Additional Benefits
Excellent washout resistance and corrosion inhibition
offer outstanding protection in wet applications or for
stored equipment.
Series 2000
Synthetic Racing Grease
AMSOIL Series 2000 Synthetic
Racing Grease (GRG) is formulated
for high-speed/hightemperature
and low-speed
high-load applications. It provides
the load-bearing capacity
of a heavy-duty grease and
the high-temperature protection
of a multi-purpose grease.
Synthetic Heavy Duty
Greases
AMSOIL Synthetic Heavy Duty
Greases (GHD) are moly-fortified
greases formulated for
low-speed high-load applications.
They provide dependable
performance in extreme pressure conditions.
Synthetic Multi-Purpose Greases
AMSOIL Synthetic Multi-Purpose Greases (GLC) are
formulated for high-speed/high-temperature service.
Their outstanding thermal and oxidative stability inhibits
deposit formation and grease breakdown in high-temperature
applications. Their superior friction-reducing
ability helps keep high-speed components operating
in their optimal temperature range and helps keep
them running clean.
Synthetic Water Resistant Grease
(GWR) is an extreme-pressure lithium complex
wheel bearing grease specially
formulated for extreme resistance to water
washout. It is the grease of choice for protection
of frequently wetted components,
such as marine trailer wheel bearings.
AMSOIL Water Resistant Grease forms a
shield against rust and corrosion, protecting
components during use and storage.
Fifth Wheel and Open Gear Compound
AMSOIL Synthetic Fifth Wheel and Open Gear Compound (GFW) provides outstanding truck tractor fifth wheel lubrication and protection. AMSOIL Synthetic Fifth Wheel and Open Gear Compound adheres to metal surfaces that are dirty or otherwise poorly prepared for lubrication, making it ideal for hard-to-service equipment operating in hostile environments.
AMSOIL Synthetic Fifth Wheel and Open Gear Compound resists water washout, protecting fifth wheels that are exposed to water. Top-quality anti-rust and anti-corrosion agents protect surfaces from the rust and corrosion water exposure may cause.
AMSOIL Synthetic Fifth Wheel and Open Gear Compound offers superior protection in high and low temperatures. It does not flake in low temperatures or soften in high temperatures.
AMSOIL Synthetic Fifth Wheel and Open Gear Compound sprays on. It’s quick, neat and economical to use.
AMSOIL Greases for All Applications | ||||
|
|
|
|
|
|
|
|
|
|
|
| |||
Oil analysis enables maintenance personnel to evaluate motor oil
service life and engine condition and save significantly on downtime,
equipment repair and oil related
costs.
Oil Analyzers Inc. puts technologically advanced testing equipment
in the hands
of experienced diagnosticians.
Accurate, reliable Oil Analyzers Inc. findings may be used to reduce
equipment
replacements and repairs, reduce the volume of lubricant purchased and destined
for disposal and reduce equipment downtime.
Oil Analyzers Inc. normally turns out reports one working day after
a sample is
received. When a time-sensitive condition is detected, OAI calls with the information.
Oil Analyzers Inc. kits include everything required for analysis:
sample gathering
materials, sample testing and, in the U.S., return postage.
Oil Analyzers Inc. offers a quantity discount over the single kit
price on orders
of 10 or more kits.
